Let's convert from raw data to spectrum file
with scaling factor for intensity
[Raw data: GCONV]


This TASK is to convert raw data file to spectrum file. This scaling can be done for each backend. You will use this TASK, if you observe using "BEARS".
reference: GCONV

* NOTICE:
Spectra will be appended if the name of the output file already exists.



* USAGE:
1. Starting GCONV
Click [GCONV] on Button Panel. The following parameter window appears.

< Parameter window for GCONV >

2. Setting up parameters
  1. Select a file from [File List] for "schedule". Usage of [File List]
  2. Specify file name for output in "Output file".
  3. Set "Array" in 'Specify below'. And select arrays that you use, such as A1, A2, A3, .... , A25 if you use BEARS.
  4. Set "Scaling2" to 'YES'.
  5. Click [Option] button. [Option] window will open, and type scaling factor to each array.

    < Option window for GCONV >


3. Execution
  1. Click [Exec] in the menu bar, and select [Activate program] from the pull-down menu.
  2. This TASK ends with the message "Appears to have ended successfully" in the message window.
Last update: January 19, 2005
NRO homepage 45m group homepage
NewStar Manual Index NewStar Manual <basic> NewStar Manual <reference>