Let's integrate raw data
[Raw data: LINTG]

This TASK is to make a "spectrum file" from "raw data". DO NOT USE INTG for all receivers including 2SB.

* NOTICE:

Spectra will be appended if the name of the output file already exists.

* USAGE:

1. Starting LINTG

Click [LINTG] on Button Panel. The following parameter window appears.

< Parameter window for LINTG >

2. Setting up parameters

1. Select a file from [File List] for "Schedule". If you have a flagged file, select such a file. Usage of [File List]
2. Specify file name for output in "spectral file(out)", and set extension to 'INTEG'.
3. Set "integration mode" to 'normal'.
4. Set "process mode" to 'all data in schedule'.
5. Set "array" to 'all arrays'.
6. Set "integration weight" to '1/rms^2'.
7. Set "RMS range" to 'fixed'.
8. Set "Multi auto scalling" to 'OFF'.
9. Set "type of naming" to 'none'.

3. Execution

1. Click [Exec] on the menu bar, and select [Activate program] from the pull-down menu.
2. This TASK ends with the message "Appears to have ended successfully" in the message window.